Nokia 9300i Cell Phone User Manual


  Open as PDF
of 6
 
Using Contact Download Application
3
Copyright © 2005 Nokia. All rights reserved.
Using Contact Download Application
This document describes the use of the Contact download
application (contact_sync) in the Nokia 9300i device when
using a Bluetooth connection and the Bluetooth SIM
Access Profile mode (remote SIM access) with the Nokia
610 Car Kit Phone. The Contact download application is
used to download contacts from a Nokia 9300i to a Nokia
610 Car Kit Phone and to forward SMS messages from a
Nokia 610 Car Kit Phone to a Nokia 9300i.
Note that you can download contacts from a SIM card also
without using the Contact download application.
To be able to use the application, you must have the
following:
• A Nokia 9300i.
• A Nokia 610 Car Kit Phone installed.
• The latest available version of contact_sync.sis file.
The Contact download application uses the language that
is selected in the Nokia 9300i during the installation of the
application. To change the language, change the language
in the Nokia 9300i, and then re-install the Contact
download application.
The Contact download application supports the following
languages: English, German, Greek, Spanish, French,
Italian, Dutch, Polish, Portuguese, Turkish, Serbian (Latin),
Croatian, Polish, Finnish, Swedish, Danish, Norwegian,
Icelandic, Estonian, Latvian, Lithuanian, Russian,
Ukrainian, Bulgarian, Romanian, Hungarian, Czech,
Slovak, Slovenian.
Installing contact_sync file
1 Switch on the Nokia 9300i, including the cover phone.
2 In the Nokia 9300i, select Desk→ Tools→ Control
Panel
→ Connections→ Bluetooth.
Set a Bluetooth name for the Nokia 9300i, and enable
Bluetooth and remote SIM access. If there is an
existing pairing with a Nokia 610 Car Kit Phone,
remove it.
3 Install the contact_sync application. By default, it is
installed to the MMC Apps folder.
4 Go to the MMC Apps folder and start the application.
The first time you start the application, it asks if you
want it to start automatically when the device is
switched on. If you select Yes, the application starts
 previous next