Filter
Top Products
Infrared (Menu 9)
69
14. Infrared
(Menu 9)
In this menu you can set up your phone to receive data through its
infrared (IR) port. To use an IR connection, the device with which
you want to establish a connection must be IrDA compliant.
The phone is a Class 1 Laser Product.
NOTE: The preferable distance between the two
devices in infrared connection is one meter at
most.
There must be no obstructions between the two
communicating devices.
The IR ports of the two devices must point at each
other.
Receiving Data via the IR Port
To receive data from another compatible phone:
1 Ensure that the IR ports of the two devices are pointing at each
other.
2 Enter the Infrared menu to activate the IR port for data recep-
tion.
3 The user of the sending phone selects the desired IR function to
start data transfer.
If data transfer is not started within 45 seconds after the activation
of the IR port, the connection is cancelled and will have to be start-
ed again.
Sending Data via the IR Port
This function allows you to send data to a compatible phone or PC.
nsm1nyen.frm Page 69 Thursday, July 2, 1998 5:56 PM