Filter
Top Products
Important: Your device can only support one antivirus application. Having
more than one application with antivirus functionality could affect performance
and operation or cause the device to stop functioning.
Lock the device
The lock code protects your device against unauthorized use. The preset code is
12345.
To unlock your device, select Unlock, enter the lock code, and select OK.
To change the lock code, select Menu > Ctrl. panel > Settings and General >
Security > Phone and SIM card. Enter the old code and then the new code twice.
The new code can be 4-255 characters long. Both letters and digits can be used,
and both uppercase and lowercase letters are possible.
Write down the new code, and keep it secret and in a safe place separate from your
device. If you forget the lock code and your device is locked, you must take the
device to a Nokia authorized service facility and additional charges may apply. To
unlock the device, the software must be reloaded, and the data you have saved in
the device may be lost.
You can also lock the device remotely by sending a text message to the device. To
enable remote locking, and to define the text for the message, select Menu >
Ctrl. panel > Settings and General > Security > Phone and SIM card >
Remote phone locking > Enabled. Enter the remote lock message, and confirm
the message. The message must be at least 5 characters long. Write down the text,
as you may need it later.
Memory card security
Select Menu > Office > File mgr..
You can protect a memory card with a password to prevent unauthorized access.
To set a password, select Options > Memory card password > Set. The
password can be up to 8 characters long and is case-sensitive. The password is
stored in your device. You do not need to enter it again while you use the memory
card on the same device. If you use the memory card on another device, you are
asked for the password. Not all memory cards support password protection.
Security and data management
© 2010 Nokia. All rights reserved.48