Filter
Top Products
Set up your phone
18
Charge the battery
Note: Before you use a charger with this device,
check the charger’s model number. This device is
intended for use with the AC-4UZ.
1. Plug the charger transformer into a standard wall outlet.
2. Plug the charger
connector into
the Pop-Port
connector at the
bottom end of
your phone.
After a few
seconds, the
battery indicator
on the display
starts to scroll.
If the battery is
completely discharged, it may take a few minutes before
the charging indicator appears on the display or before
any calls can be made.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with
the Nokia 2366i device. The use of any other types
may invalidate any approval or warranty, and may
be dangerous.
■ Switch your phone on or off
1. To switch your phone on or off, press and hold the end
key for at least 4 seconds.
2. Enter the lock code, if necessary, and select OK. See
"Phone lock," p. 49.