Filter
Top Products
Tools
74
5. If you have not already entered an exchange rate, the
device prompts you to enter it. Select OK. You can edit
the exchange rate at any time.
■ Timers
Your device contains two event timers: a normal timer that
counts down a set interval, and an interval timer that counts
up set intervals.
The timers only work when the phone is on. Once you turn
off your phone, the timers are no longer active.
Normal timer
This countdown timer enables you to enter a specific duration
(up to 99 hours, 59 minutes, and 59 seconds). When the time
runs out, your device sounds an alarm.
To set the normal timer, do the following:
1. Select Menu > Tools > Timer > Normal timer.
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
and the timer (in hh:mm:ss format) appear in the
standby mode when the countdown timer is running.
When the time runs out, your phone sounds an alarm, vibrates,
and flashes its lights. If you are in standby mode, select
Restart or Exit. If you are not in the standby mode, press any
key during the alarm to stop the timer.
After 60 seconds the timer alert expires automatically.
Select Exit or press the end key to clear the timer note.
To change the time, do the following:
1. Select Menu > Tools > Timer > Change time.
2. Enter the new time, and select OK.