Filter
Top Products
Connectivity
14
Show my PTT address—Select In 1 to 1 calls, In group
calls, In all calls, or Never. Your service provider may have
disabled some of these options in your device.
Show my login status—Select Yes if you want your status
to be shown or No if you want your status to be hidden.
Select Connection settings, and enter the following
information:
Domain—Enter the domain name obtained from your
service provider.
Access point name—Enter the push-to-talk access point
name. The access point name is needed to establish a
connection to the GSM/GPRS network.
Server address—Enter the IP address or domain name of
the push-to-talk server obtained from your service
provider.
User name—Enter your user name obtained from your
service provider.
Password—Enter a password, if required, to make a data
connection. The password is usually provided by the
service provider and is often case-sensitive.
Log in to push to talk
Press , and select Connect. > Push to talk. Push to
talk automatically logs in to the service when started.
When log in is successful, push to talk automatically
connects to channels that were active when the
application was last closed. If the connection is lost, the
device automatically tries to log back in until you choose
to exit push to talk.
Exit push to talk
Press , and select Connect. > Push to talk > Options >
Exit. Switch Push to talk off after exiting application?
is displayed. Select Yes to log out and close the service.
Select No if you want to keep the application active in the
background. If several applications are open and you want
to switch from one application to another, press and hold
.
Make a one-to-one call
Select Options > PTT contacts.
Select the contact you want to talk to from the list and
select Options > Talk 1 to 1.
Press and hold the entire time you are talking. When
you have finished talking, release .
You can talk to the contact by pressing and holding
also in other views in the Push to talk application, for
example, the contacts view. To make a new phone call, first
end the one-to-one call. Select Disconnect or press .