Nokia 3100 and Nokia 3120 User Guide 41 Copyright © 2004 Nokia
Messages
• VOICE MESSAGES
If you subscribe to voice mail, your service provider will furnish you with a voice
mailbox number. You need to save this number to your phone to use voice mail. When
you receive a voice message, your phone lets you know by beeping, displaying a
message, or both. If you receive more than one message, your phone shows the
number of messages received.
Save your voice mailbox number
Your service provider may have already saved your voice mailbox number to your phone.
If so, the number will appear in step 2. Select OK to leave the number unchanged.
1 Select Menu > Messages > Voice messages > Voice mailbox number.
2 If the box is empty, enter the voice mailbox area code and number, and select OK.
Call and set up your voice mail
1 Once you have saved the voice mailbox number, press and hold the 1 key.
2 When you connect to voice mail and the prerecorded greeting begins, follow
the service’s automated instructions to set up your voice mail.
Listen to your voice messages
Once you have set up voice mail, you can dial the number in one of four ways:
• Dial the number, by using the keypad.
• Press and hold the 1 key.
• Select Listen if there is a notification message in the display.
• Select Menu > Messages > Voice messages > Listen to voice messages.
After a brief pause, your phone dials the voice mail number.
Once you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such as
voice mail and then save the number to a 1-touch dialing location. Dialing codes
instruct the receiving system to pause, wait, bypass, or accept the numbers that
follow them in the dialing string.
Note: Each voice mail service can vary. The examples and steps that follow
are for clarification. Check with your service provider if you have specific
questions about your voice mail service.
NECESSARY INFORMATION
You will need this information in “Set up voice mail with dialing codes” on page 42.
Be sure to record all of the information correctly.