Nokia N-3120 Cell Phone User Manual


 
42 Copyright © 2004 Nokia
1 Write down your voice mailbox number, then call and check your voice mail
as you normally would.
2 Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
pound key.
INSERT DIALING CODES
Press the Star key repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the dialing string.
For example, press the Star key four times to display w (wait character). Pause
briefly and the wait character is inserted into the dialing string. Available dialing
codes are as follows:
SET UP VOICE MAIL WITH DIALING CODES
1 Select Menu > Contacts > 1-touch dialing, scroll to an empty 1-touch
dialing slot and select Assign.
2 Enter your voice mailbox number, including the area code.
3 Enter any dialing codes, as necessary.
For example, if you pause for 5 seconds after connecting to voice mail, enter
p twice after the voice mailbox number, such as 2145551212pp.
4 Enter any remaining pauses, PIN codes, and other information that allows you
to listen to your messages, then select OK.
5 Enter a name (such as, Voice Mail) and select OK.
6 To dial and listen to your voice mail, select and hold the assigned 1-touch
dialing key at the start screen.
No other keypresses should be necessary to connect and listen to your messages.
*
Bypasses a set of instructions.
+
Precedes an international telephone number.
p
Pauses for 2.5 seconds before sending any numbers that follow.
w
Wait. Your phone waits for you to press the Talk key before it sends any
numbers or codes that follow.