Filter
Top Products
Nokia 3595 User Guide 71 Copyright © 2003 Nokia
Set up the loopset profile
The LPS-3 loopset gives people with T-coil equipped hearing aids the ability to
make and receive calls without noise interference.
Important: Refer to the booklet that comes with the LPS-3 for complete
instructions and safety information.
1 Plug the loopset plug into the jack in the
bottom of the phone, as shown in the
illustration.
2 Press Menu 4-7-3 (Settings > Accessory
settings > Loopset).
3 Scroll to Use loopset, then press Select.
4 Scroll to Yes, then press Select.
Note: If you want to use the headset or TTY,
you perform steps 2-3, then select No to deactivate the loopset profile.
Set up the TTY/TDD profile
You can connect your phone to a TTY/TDD using the Nokia TTY/TDD Adapter (HDA-
9). In order for your phone to recognize the TTY/TDD, you’ll need to set up the TTY/
TDD profile, under Accessory settings.
Important: Some manufacturers of TTY/TDD devices suggest that the
phone be least 18 inches from the TTY/TDD device. Remember that when
connecting to any other device, read its user guide or contact its
manufacturer for detailed instructions and safety information.