Filter
Top Products
61Copyright © 2006 Nokia. All rights reserved.
Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the
phone is in the standby mode and no function of the phone has been used. Select On, and set the time from 5
seconds to 60 minutes.
Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the
security code, and select On.
When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Cell info display > On — to receive information from the network operator depending on the network cell used
(network service)
Welcome note — to enter a welcome note to be shown briefly when the phone is switched on
Operator selection > Automatic — to set the phone automatically to select one of the cellular networks
available in your area. With Manual, you can select a network that has a roaming agreement with your home
network operator.
Confirm SIM service actions — See SIM services p. 96.
Help text activation — to select whether the phone shows help texts
Start-up tone — to select whether the phone plays a start-up tone when the phone is switched on
■ Connectivity
You can connect your phone to compatible devices using an infrared connection. You can also define the
settings for packet data dial-up connections.
Infrared
You can send or receive data to or from a compatible phone or data device (for example, a computer) through
the infrared (IR) port of your phone. To use an IR connection, the device with which you want to establish a
connection must be IrDA compliant.