Nokia 5070 Cell Phone User Manual


 
63Copyright © 2006 Nokia. All rights reserved.
Select Always online to set the phone to automatically connect to an packet data network when it is switched
on. indicates a packet data connection.
Modem settings
You can connect the phone using an IR or a data cable (CA-42) connection to a compatible PC, and use the
phone as a modem to enable packet data connectivity from the PC.
To define the settings for connections from the PC, select Menu > Settings > Connectivity > Packet data >
Packet data settings > Active access point, activate the access point you want to use, and select Edit active
access point. Select Alias for access point, and enter a nickname for the currently selected access point. Select
Packet data access point, and enter the access point name (APN) to establish a connection to an EGPRS
network.
You can also set the dial-up service settings (access point name) on your PC using the Nokia Modem Options
software. See Nokia PC Suite p. 97. If you have set the settings both on the PC and on your phone, the PC
settings are used.
Enhancements
This menu is shown only if the phone is or has been connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. You can select an enhancement menu if the corresponding
enhancement is, or has been, connected to the phone. Depending on the enhancement, select from the
following options:
Default profile — to select the profile that you want to be automatically activated when you connect to the
selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming
call alert is set to Beep once or Off, automatic answer is off.
Lights — to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a keypress.
Text phone > Use text phone > Yes — to use the text phone settings instead of headset or loopset settings