Filter
Top Products
39 Copyright © Nokia 2004
Messages (Menu 1)
Call and setup your voice mail
1. Once you have saved the voice mailbox number, press and hold 1.
2. When you connect to voice mail and the prerecorded greeting begins, follow the
service’s automated instructions to setup your voice mail.
Listen to your voice messages
Once you have setup voice mail, you can dial the voice mailbox number in one of four
ways:
• Dial the number using the keypad.
•Press and hold 1.
•Press Listen if there is a notification message in the display.
• At the start screen, select Menu > Messages > Voice messages > Listen to voice
messages.
Once you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such as voice
mail, and save the number to a speed dialing location. Dialing codes instruct the
receiving system to pause, wait, bypass, or accept the numbers that follow them in the
dialing string.
Note: Voice mail services vary by service provider. The following instructions
are examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in mind
that each voice mail service may vary. However, it should look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press #.
Be precise; you will need this information in Setup voice mail with dialing codes, 40.