Filter
Top Products
40 Copyright © Nokia 2004
Insert dialing codes
Press * repeatedly to cycle through dialing codes. Once the desired code appears in the
display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions.
+ —International prefix.
p—Pauses for 2.5 seconds before sending any numbers that follow.
w—Waits for you to press the Talk key before sending the numbers or codes that follow.
Setup voice mail with dialing codes
1. At the start screen, select Contacts > Speed dialling.
2. Scroll to an (empty) speed dialing slot and press Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes and enter any codes as necessary using the information that
you wrote down from Write down voice mailbox number and process, 39.
For example, if you pause for 5 seconds after connecting to voice mail, enter p twice
after the voice mailbox number, for example, 2145551212pp.
5. Enter any remaining pauses or other information that allows you to listen to your
messages, and press OK.
6. Enter a name (such as Voice Mail), and press OK.
To dial and listen to your voice mail, press and hold the assigned speed dialing key at the
start screen.
■ Minibrowser messages
Minibrowser messaging is a network service. See Network services, 6 for more
information.
If your wireless service provider supports this feature, you can use the Minibrowser to
check for e-mail messages. At the start screen, select Menu > Messages > Minibrowser
messages > Connect.
See Minibrowser (Menu 8), 75 for more information on using the Minibrowser in your
phone to access web pages.