Filter
Top Products
63
3.
Enter new security code at
Enter new security
code:
, press
OK
(must be five digits)
4.
Enter new security code again at
Verify new
security code:
, press
OK
5.
Phone will display
Security code changed
Note: If you have changed your security code and don’t remember
the new code, contact your service provider. Once you have
changed your security code, the default setting is no longer valid.
Send own caller ID with next call
In most service areas, when you call someone your name
will be presented to his/her caller ID (if they subscribe).
This feature allows you to block their caller ID (your
number will not be displayed) when you call them. This
feature works on a per-call basis. Contact your service
provider for more details.
Please be aware of the following:
• This feature is only effective when calling to a number that is
equipped with Caller ID.
• This feature is available only when supported by the wireless
network, and may not function if you are roaming.
Note: Before you can activate this feature, you should first store
the feature code given to you by your service provider. Otherwise,
this feature may not appear in the menu or function properly.
Check with your service provider to confirm if the feature code has
been pre-programmed for you. See “Network feature setting” on
page 48 for more details.
1.
Press
Menu
4-4-3 (
Settings
-
Network services
-
Send own number
)
2.
W
to
Yes
(to show your number) or
No
(to not show
it) and press
OK
3.
Enter the number you wish to call (or press
Search
to retrieve the number from the phone book and
press
OK
), then press
OK
4.
Your phone will attempt to call this number with the
feature code you stored in Menu 4-4-4 (
see “Network
feature setting” on page 48
)