Filter
Top Products
Menu functions
108
Copyright
© 2004 Nokia. All rights reserved.
• To set the profile to be active for a certain amount of time up to 24 hours,
select Timed and set the end time. When the time set for the profile expires,
the previous profile that was not timed, becomes active.
• To personalise the profile, select Personalise. Select the setting that you want
to change and make the changes. The same settings can also be changed in the
Tone settings menu, see Tone settings on page 108.
To change your presence status information, select My presence. This menu is
available if you have set Synchronise with profiles to On, see My presence on
page 97. Select My availability to change your availability status and My
presence message to edit your status message.
To rename a profile, select Profile name. The General profile cannot be
renamed.
Tip: To change the profile quickly in standby mode when the keypad is not
locked, open the list of profiles and scroll to the desired profile by briefly
pressing the power key. To activate the profile, press and hold the power
key.
Tone settings
Press Menu, and select Settings and then Tone settings. You can find the same
settings in the Profiles menu, see Profiles on page 107. Note that the settings you
make will change the settings in the active profile.
Select Incoming call alert to choose how the phone notifies you of an incoming
voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.