Filter
Top Products
General information
16
Copyright
© 2004 Nokia. All rights reserved.
General information
■ Access codes
Security code (5 to 10 digits)
The security code protects your phone against unauthorised use. The pre-set code
is 12345. Change the code, and keep the new code confidential and in a safe place
separate from your phone. To change the code, and to set the phone to request the
code, see Security settings on page 122.
If you key in an incorrect security code five times in succession, the phone ignores
further entries of the code. Wait for 5 minutes and key in the code again.
PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN
• The PIN (Personal Identification Number) code protects your SIM card against
unauthorised use. The PIN code is usually supplied with the SIM card. Set the
phone to request the PIN code each time the phone is switched on, see
Security settings on page 122.
• The PIN2 code may be supplied with the SIM card and is required to access
some functions.
• The module PIN is required to access the information in the security module.
See Security module on page 163. The module PIN is supplied with the SIM
card if the SIM card has a security module in it.