Filter
Top Products
Get started
15
■ Open and close the phone
To open the phone
rotate the upper part
to the right (1) or to
the left until it snaps
into place.
To close the phone,
rotate the upper part
down in the opposite
direction (2).
Important: When you open the phone, rotate the upper part 180 degrees
to the left or right. Do not rotate the upper part more than 180 degrees.
If you force the upper part more than 180 degrees in either direction, the
phone will be damaged.
To switch off a tone that sounds when you open and close the phone,
see “Tones,” p. 51.
■ Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Press and hold the power key. See “Keys and parts,” p. 17.
If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****),
and select OK.
Plug and play service
When you switch on your phone for the first time, and the phone is in
the standby mode, you are asked to get the configuration settings from
your service provider (network service). Confirm or decline the query.
See "Connect to serv. support," p. 61, and “Configuration settings
service,” p. 11.