Filter
Top Products
E-19
After sealing the Case, make sure the camera is functioning properly.
1. Press the POWER button on the Case and confirm that the camera
turns ON/OFF.
2. Press the / /SCN button on the Case and confirm that the
camera modes switch properly.
3. Press the shutter lever on the Case and confirm that the camera
shutter releases.
ț Check the other control buttons on the Case to confirm that the
camera functions properly as intended.
Check the operation of the loaded camera.
:•If the camera does not function properly, restart the digital
camera installation procedure from “Check the digital
camera.” on page E-14 of this manual.
CAUTION