Filter
Top Products
Turning your headset on and off
6 Palm
®
Treo™ Wireless Headset
Pairing with other Bluetooth phones
0
Turning your headset on and off
To turn your headset on and off, press and hold the multifunction button for
three to five seconds. The following clues alert you that the headset is on or off:
Audible A series of two tones indicates that the headset is turned on or off.
Visual A burst of four flashes on the blue indicator light indicates that the
headset is turned on or off. When the headset is on, the indicator light flashes.
When it is off, the light stops flashing and remains unlit.
1
Press and hold the multifunction button for approximately eight
seconds, until you see a solid blue light.
2
Set your Bluetooth phone to discover the headset by following your
phone’s instruction guide. Typically, the steps involve going to a Setup,
Connect, or Bluetooth menu on your phone and then selecting the
option to discover a Bluetooth device.
3
When your phone finds the “Treo Headset,” it asks if you want to pair.
Confirm this by selecting Yes or OK.
4
When your phone asks for a passkey, enter 0000 from your keypad,
and then press Yes or OK.