Filter
Top Products
Disabling all Tones
1
From Idle mode press
B 521
to enter the All Tones menu
2
Press
B
to disable alltones and the silent indicatoricon (
[
) will bedisplayed.
Repeat the process to enable all tones.
Setting the Backlight Colour
1
From Idle mode press
B 542
to enter the Backlight Colour menu
2
Use
e
to cycle through the colours available
3
Press
B
to select the desired colour
Disabling Key Backlight
The keypad has a green backlight which can be enabled/disabled as follows:
1
From Idle mode press
B 545
to enter the Key Backlight menu
2
Press
B
to disable the backlight
Repeat the process to enable the key backlight.
Disabling Back Case Light
The back case of the phone has an LED which is lit continuously during a call. This
may be enabled/disabled as follows:
1
From Idle mode press
B 546
to enter the Back Case Light menu
2
Press
B
to disable the back case light
Repeat the process to enable the back case light.
Using Voice Commands
Before you can use any of the phone’s voice activated functions you will need to
configure the phone so that it will recognize your own voice and intonation.
Voice Dial Setup
This function allows you to recall numbers from your
Phonebook using voice commands.
1
From Idle mode press
B 531
to enter the
Voice Dial menu
2
Press
B
to create a new command
3
Browse through the Phonebook to select an entry which you wish to attribute a
voice command to, and press
B
Note: Each recording is short in length, so be prepared to speak once you have
initiated the recording.
18
Personalising Your Phone