Filter
Top Products
38
Messages
Setting the MMS server
MMS message server settings must be configured before using the
service. Your multimedia configuration settings may already be set
by your service provider. If settings are not available, contact your
service provider.
d Main menu > Messages > Settings > MMS > Server list
1. [192] to scroll to the required server 7 [6] (Edit)
2. [192] to edit the required item 7 [5] (Save)
3. [5] (Launch)
The following information is available for each server setting: Server
name, IP address, IP port, MMSC address, Linger time,
Connection (CSD or GPRS), CSD and GPRS.
Send options
You can set the following options for outgoing MMS messages.
d Main menu > Messages > Settings > MMS > Send options
1. [192] to scroll to the required setting 7 [5] (Select)
Note: You need to configure CSD or GPRS before configuring the server
settings. See “Data connections” on page 75.
Delivery
report
Choose whether or not to receive a confirmation that your
message has been delivered.
[192] to scroll to On or Off 7 [5] (Select)
Own address
Choose whether or not to show your address to the
recipient.
[192] to scroll to Hide or Show 7 [5] (Select)
Validity period
Set the period that messages are stored at the Message
centre.
[192] to scroll to 1 hour, 12 hours, 1 day, 1 week or
Maximum 7 [5] (Select)
Priority
Set the priority level for your outgoing messages.
[192] to scroll to High, Normal or Low 7 [5] (Select)