Pantech C610 Cell Phone User Manual


 
12
SIM card and battery
About your SIM card
When you subscribe to your network operator, you receive
a SIM (Subscriber Identity Module) card containing your
registration information, PIN code, etc.
Like a credit card, it should be kept secure and handled
carefully. Do not bend, scratch or expose it to moisture. Avoid
static electricity.
To avoid corrupting your SIM card’s memory, always switch off
your phone before removing or inserting your SIM card.
About your battery
Your phone uses a Li-Ion battery. Make sure to use authorized
battery and charger only. For more details, please inquire at
your nearest dealer.
note
: Your phone is powered by a Lithium Ion (Li-Ion)
battery. Unlike other forms of battery technology, you can
recharge your battery while some charge remains without
reducing your phone’s itself due to the “battery memory
effect” inherent in those technologies.
Installing/removing SIM card and battery
1. To remove the battery cover press down
and slide out from the unit. To fit the
battery cover, put it on the guide rail and
push up.
2. Insert the SIM card into the slot. The
gold contacts of the SIM card should go
against the metal contacts of the phone.
Put the contacts of the battery into the
hole located at the bottom of the unit
insert and press the upper side of the
battery until you hear the “click”.
3. To remove the battery, lift the bottom
of the battery up (1) and remove (2)
the battery. Push the SIM card in the
direction of the arrow as shown.