Filter
Top Products
10
Parrot MK6100
uSING FOR ThE FIRST TIME
INSTAllING ThE PARROT MK6100
Prior to fix the hands-free kit’s different components inside the car,
connect the installation cables and the screen cable to the electronic
control unit.
Remove the original connectors from your vehicle’s audio system.
The cables supplied with the kit feature ISO connectors and two pairs
of line-out jacks. The line-out jacks can be used if your audio system
features this option (use of an amplifier). Several set-ups are therefore
possible, depending on the type of car stereo and your vehicle:
Car Stereo With an iSo ConneCtor (reFer to the FolloWing Diagram)
• Connect the male connectors of the hands-free kit to the car stereo.
• Join the vehicle’s audio and power supply cables to the female
connectors of the Parrot MK6100.
• On the installation cable, connect the free yellow wire to one
of the audio system’s corresponding mute-in jacks if available
(mute in 1, mute in 2 or mute in 3).
Note: the mute function is used to silence the sound from
your car stereo to make way for a call. The choice of the
mute-in jack depends on your car stereo’s configuration.
KIT CONTENTS
• Control screen
• Screen cable
• Screen bracket
• Wireless remote controls
• Remote bracket (for steering wheel and dashboard)
• Installation cables
• Electronic control unit
• User guide
• Parrot product guide
• Double-sided tape
Caution
blaSt riSkS may oCCur iF the battery iS replaCeD With an
inCorreCt battery type.
throW uSeD batterieS in the garbage in ComplianCe
With the proViDeD inStruCtionS.