Filter
Top Products
12
2 Turn the bracket around.
3 Re-insert the bracket into the back of the
base station.
4 Insert screws (not included) into the wall.
5 Align the mounting holes on the back of
the base station with the screws on the
wall.
6 Slide the base station down into place.
Connect the charger
Note
The instructions for charger connection below •
is only available for multi-pack models.
1 Connect the output plug of the power
socket to the bottom of the charger.
2 Connect the power socket to a standard
wall outlet.
Wallmount the base station
Warning
You must follow the instructions below to •
wallmount the base station.
1 Remove the bracket from the base
station.
EN
IFU_SE565_05_EN.indd 12 2009-5-15 17:48:40