Philips SE565 Cell Phone User Manual


  Open as PDF
of 40
 
33
Delete an outgoing message
1 Press menu.
2 Select [ANSWER MACHINE]
>[RECORD OGM], then press
[SELECT] to conrm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY], then press [SELECT] to conrm.
4 Select [DELETE], then press [SELECT]
to conrm.
5 The pre-recorded outgoing message is
restored.
Note
No pre-recorded outgoing message can be •
deleted.
Incoming messages (ICM)
Each message can be up to 3 minutes long. When
you receive new messages, the new message
indicator ashes on the answering machine and
the handset displays a notication message.
Note
If you pick up the phone when the caller leaves •
a message, the recording stops and you can
talk to the caller directly.
Note
If the memory is full, the answering machine •
switches to [ANSWER ONLY] automatically.
Delete old messages to receive new ones.
Listen to the incoming messages
Incoming messages are played back in the
sequence they are recorded.
From the base
Start/Stop playback: Press • .
Adjust the volume: Press •
/ .
Outgoing messages (OGM)
The outgoing message is the message your
caller hears when the answering machine picks
up the call. The answering machine has 2 pre-
recorded outgoing messages: the [ANSWER &
REC.] mode and [ANSWER ONLY] mode.
Record an outgoing message
The maximum length of the outgoing message
you can record is 3 minutes. The newly
recorded outgoing message automatically
replaces the old one.
1 Press menu.
2 Select [ANSWER MACHINE] >
[RECORD OGM], then press [SELECT]
to conrm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY], then press [SELECT] to conrm.
4 Select [RECORD OGM], then press
[SELECT] to conrm.
5 Recording starts after the beep.
6 Press [OK] to stop recording or the
recording stops after 3 minutes.
The recorded outgoing message plays »
back automatically for your review.
Note
To restore the pre-recorded outgoing message, •
delete your current outgoing message.
Listen to the current outgoing
message
1 Press menu.
2 Select [ANSWER MACHINE] >
[RECORD OGM], then press [SELECT]
to conrm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY]. Press [SELECT] to conrm.
4 Select [PLAY], then press [SELECT] to
conrm.
The handset plays the current outgoing »
message.
English
EN
IFU_SE565_05_EN.indd 33 2009-5-15 17:48:50
 previous next