34
All old messages are permanently »
deleted.
From the handset
1 Press menu on the handset.
2 Select [ANSWER MACHINE] >
[DELETE ALL], then press [SELECT] to
conrm.
The handset displays a conrmation »
request.
3 Press [OK] to conrm.
All old messages are permanently »
deleted.
Note
You can delete the read messages only. No •
deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Then you can decide whether or not
to talk to the caller directly.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1 Press menu.
2 Select [ANSWER MACHINE] >
[SETTINGS] > [RING DELAY], then
press [SELECT] to conrm.
3 Select a new setting, then press
[SELECT] to conrm.
The setting is saved. »
Skip backward: •
- During message playback, press
to
play the message from the beginning.
- During the rst second of the current
message, press
to play the previous
message.
Skip forward: Press •
to skip to the next
message.
Delete the current message: Press •
.
Note
No deleted messages can be recovered. •
From the handset
1 Press menu.
2 Select [ANSWER MACHINE] > [PLAY],
then press [SELECT] to conrm.
New messages start playing. Old »
messages start playing if there is no
new message.
Press • [BACK] to stop the playback.
Press •
to enter the options menu.
Press •
/
to increase/decrease the
volume.
Delete an incoming message
From the base
1 Press during message playback.
The current message is deleted. »
From the handset
1 Press during message playback to
enter the options menu.
2 Select [DELETE], then press [SELECT]
to conrm.
The current message is deleted. »
Delete all old incoming messages
From the base
1 Press and hold in standby mode.
EN
IFU_SE565_05_EN.indd 34 2009-5-15 17:48:51