Filter
Top Products
44
2. When you hear the carrier’s calling card tone,
press . The phone sends the phone num-
ber to the network.
CARD
CALL
remains on
the display until the transmission is complete.
The phone then prompts you to wait for
another dial tone (
WAIT
FOR
PROMPT
).
3. When you hear the dial tone, press
again. The phone sends the card number to
the network. Continue with the call as you nor-
mally would.
Notes: This procedure might not apply to all calling
card options programmed into your phone. For
more information, contact your calling card carrier.
USING TOUCH TONE SERVICES
To use your cellular phone to control answering
machines and special telephone services (such as
bank-by-phone or voicemail), simply enter touch-
tone commands using your phone’s keypad after
the service answers.
Or, you can store the service’s command se-
quence in a speed-dial memory (see “Storing a
Number in Memory” on Page 18), then follow these
steps after the service answers.
1. Recall the memory that contains the command
sequence.
2. Press . The phone sends the com-
mands as touch tones.
17-1165.fm Page 44 Wednesday, July 21, 1999 2:46 PM