Sagem 800 Cell Phone User Manual


 
1 - Introduction
SAGEM F@st™ 800 / 840 (PPP) User Guide - 288 047 975-02
Reproduction and communication prohibited without the written permission of Sagem Communication
Page 1-3
1.1 Overview
The SAGEM ADSL modem exists in two models :
¾ The SAGEM F@st™ 800,
¾ The SAGEM F@st™ 840.
The SAGEM F@st™ 800 modem is designed for Internet connection by the switched analog
telephonic network (PSTN)
The SAGEM F@st™ 840 modem is designed for Internet connection by the integrated service
digital network (ISDN).
In the next sections of this User Guide, we will use the general term SAGEM F@st™ 800/840 to
designate these two modems. However, we will notify you of notable differences every time it
will be necessary.
The SAGEM F@st™ 800 / 840 is an ADSL over ISDN modem used to browse the Internet with
ease at speeds of up to 8 Mbit/s. The modem's purpose is to transmit data between a terminal
(PC or Mac) connected by a USB interface and an Internet Access Provider (IAP), via an ADSL
link.
The SAGEM F@st™ 800 / 840 supports the following encapsulations:
PPPoA in VCMUX mode,
PPPoA in LLC mode,
PPPoE in VCMUX mode,
PPPoE in LLC mode.
The modem has the advantage of being powered via the USB interface and therefore does not
needs a main power unit or a power cable.
The SAGEM F@st™ 800 / 840 has the following two interfaces:
¾ USB interface
¾ Remote network interface (ADSL)