Filter
Top Products
51
12. WAP Function
Configuration of WAP parameters
- Select the desired access service using
the scrolling arrows then press on
Modify (
key).
- The parameters to be entered are:
the name of the service,
a user name,
a password,
the IP address of the WAP gateway:
enter the IP number using the @ key
(Next) then choose Secure or Non
secure,
the call number,
the access mode (digital or analog).
Once all the parameters entered, you
can activate the selected service.
- Confirm your choice with OK.
Show URL which presents the current
Internet address.
Disconnect which ends the communication
(allows a navigation whithout being
connected).
Linger timer enables you to set a time
limit, after which the phone will disconnect
automatically if you have forgotten to
disconnect from a service.
FastW@p (depending on model) which
provides quicker access to the pages of
Internet sites.
Reset cache: empties data stored from
previous connections.
Quit: return to the phone standby screen.
The G icon enables you, by pressing the @
key, to access two display modification
possibilities:
- the zoom to change the size of characters by
pressing on successively
- full screen display by pressing on
.
Connection
From the Home menu, start up
connection to a service.
Once connected to a service,
press on
G then [Menu] to return
to the local menu.
When connecting on
the GSM network,
the @ character
flashes, and the cost
of communications
starts to clock up as
soon as it stops
flashing.
MY_304X_EN-12.p65 28/12/01, 11:3651