Filter
Top Products
My phone in 5 minutes 19
Setting time and date
When you use your phone for the first time, you need to set the date and time.
In due course, when the battery is completely discharged, or if it has been removed, you will be prompted systematically to
confirm date and time.
Setting the date
Set the date by entering it directly in numerical form or by using the
down
/
up
T
S
keys to decrease or increase the default
values.
Use the
right key
X
(or left key
W
) to access the
next
(or last ) data input field.
Once the date is correct, press the
right programmable key
to
accept
.
Setting the time
Same procedure as for setting the date.
Network
From now on the phone hunts for a network on which it can make calls. If it finds one, it displays the name of the network on
the screen. You are then ready to send or receive a call.
First call
Dial the number of your correspondent.
Press the
Start
key.
During the call, the call in progress icon flashes on screen and tones may indicate the establishment of the call.
Once communication has been established, the call icon stops flashing.
You can adjust the sound level (volume) using the
left
and
right programmable
keys
.
At the end of the conversation press the
Stop
key to hang up.
If the network icon appears, calls are possible on your operator's network.
If the letter
R
and a network name are displayed, calls are possible on the network of a different operator.
If the letter
R
is displayed without any network name, only the emergency services are accessible (ambulance, police,
fire brigade).
If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal strength
indicator received allows you to display the quality of reception. If it indicates less than three bars, search for better
reception in order to call in good conditions.
251959374_myX2-2_lu_en.book Page 19 Mercredi, 30. mars 2005 11:48 11