Filter
Top Products
97
Erase all
To erase all voice calling entries:
1. In standby mode, press to display the main menu.
2. Press for
Voice Dial.
3. Press for
Erase All.
4. At the voice prompt and screen prompt, press to confirm that you
wish to
Erase All of the entries. A screen prompt will display when the
entries have been erased.
5. Press at any time to exit without removing any voice entries.
Set active
Voice dialing is always active once you have programmed the phone to accept
voice entries and associated the phone numbers. To place voice activated calls,
press and hold . Or, if you are wearing the Samsung approved earbud,
press and hold the silver button located above the earbud microphone. After
you hear the voice prompt and the beep, say the name of the person you are
calling into the phone or earbud microphone.
Note: When using the earbud for Voice Dialing, the phone should be set to
[*]/Earphone.
Record your entries in the phone before using the Voice Dial function in the
Hands Free mode. The hands free kit requires you to repeat new entries when
you are in Hands Free mode using Voice Dial.
Once you have recorded your entries using the hands free kit, you can use the
Voice Dial function in Hands Free mode.
canadaN370.book Page 97 Monday, May 20, 2002 2:57 PM