Filter
Top Products
Section 2I: Using Your Phone’s Voice Services 90
5. Wait for the beep, and then repeat the digits using a normal
tone of voice. The phone plays back your recording and asks
you if the recording sounds "OK."
6. If the recording sounds OK (no mistakes, and no background
noises), say Yes. If you need to re-record the digits to fix any
problems, say No. The phone then prompts you to say the
digits again. Wait for the beep, and then record the digits again.
Repeat this step until you are satisfied with the recording.
7. After confirming that the recording sounds OK, repeat the
recording process with the next set of digits. After six sets of
digits, the phone will ask you whether you want to do more
adaptation. Answer Yes.
8. Repeat steps 4-8 for another six sets of digits. After the sixth set
of digits, you will be half way through the session and the
phone asks “More Adapatation?” Select OK to continue for six
more sets of digits, or press
for partial adapation. When
you are finished with a full session, you will reach a screen that
reads, “Adaptation Complete.”
Resetting Digit Dial Adaptation
To erase any adaptation and reset Digit Dial to its original state:
1. Press for Settings.
2. Press for Voice Dial.
3. Press for Reset Digits.
4. Press the navigation key up or down button to select Yes and
press
.
Note:
It is recommended that you perform the complete adaptation of Digit Dial
at least once to achieve the maximum benefit of this feature. If a partial
adaptation is performed, you can always return later and resume the
process from the half way point.