Filter
Top Products
Insert Battery
1. Remove the battery cover.
2. Align the contacts on the battery with the
contacts in the back of the device.
3. Push the battery down until it locks into place.
4. Replace the battery cover.
Charge Battery
1. Plug the AC Travel Charger into a standard AC
wall outlet.
2. Plug the travel charger into the jack on the left side of
the phone. The indicator light at the top of the device
is red while charging, and green when fully charged.
Note: When charging is complete, unplug the charger
from the power outlet.
Insert microSD™ Card
A microSD™ Card is a removable memory card that will
increase data storage capacity of the device.
1. Remove the cover on the right side of the device,
that reads microSD™.
2. Insert the narrow end of the microSD™ Card into the
slot, then replace the cover.
Note: microSD™ Card sold separately.
5
BJ2_GSG_combinedFINAL_readerSpreads.indd 5 10/29/07 2:09:26 PM