Filter
Top Products
Getting Started
22
3. When charging is finished and the battery icon
becomes solid and “Fully charged” message is
displayed, disconnect the adapter from the
power outlet and from the phone by pressing
the grey tabs on both sides of the connector and
pulling the connector out.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
(), you hear a warning tone and a message
repeats at regular intervals on the display.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
Getting Started
23
Switching the Phone On or Off
To switch the phone on:
1. Open the folder.
2. Hold down the key until the phone
switches on.
3. If the phone asks for a PIN, enter the PIN and
press the Ok soft key. For further details, see
page 157.
The phone searches for your network and the
current date and time appear on the main and
external displays. After finding it, you can make
or receive a call.
Note
: To change the language, use the
Language
menu option (
Menu 4.3
).
For further details, see page 101.
To switch the phone off:
Hold down the key until the power-off
animation displays.
Menu Phonebook
Service Provider
Wed 17 Sep 03
12:53
12:53
Wed 17/09
E700EnglishForAUS.book Pages 22 - 23 Friday, November 12, 2004 1:33 PM