Samsung GH68-04620A Cell Phone User Manual


 
Phone Settings
104
SIM Lock
(Menu 4.4.6)
To enable the SIM lock feature, you must enter a
new four- to eight-digit SIM lock code, and confirm
it by entering it again.
The following options are available:
Disable: you can use any other SIM cards with
your phone.
Enable: you must enter the SIM lock code to use
another SIM card with your phone.
To unlock the SIM, enter the SIM lock code.
FDN Mode
(Menu 4.4.7)
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
the Phonebook. You must enter your PIN2.
Note
: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, see the Change PIN2 menu
option on the page 104.
Change PIN2
(Menu 4.4.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Phone Settings
105
Note
: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Auto Redial
(Menu 4.5)
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note
: The interval between two call attempts varies.
The following options are available:
Off: the number is not redialled.
On: the number is redialled automatically.
Side Key
(Menu 4.6)
This menu option allows you to change the function
of the volume keys on the left side of the phone
when you receive an incoming call.
The following options are available:
Reject: the incoming call is rejected when you hold
down one of the volume keys.
Silence: the ring tone is silenced when you hold
down one of the volume keys; the call is not
rejected.
E700EnglishForAUS.book Pages 104 - 105 Friday, November 12, 2004 1:33 PM