Filter
Top Products
3635
SYSTEM MAINTENANCE
ALARMS
The iDCS 500 is provided with software that self-checks for any failures. If a
failure does occur in the iDCS 500 software or hardware, a fault error will be
generated and buffered to an alarm report. During an alarm state every
phone with an assigned SYSTEM ALARM button will ring and cause the
SYSTEM ALARM button to flash amber. A phone with a display should be
used so that the alarm information can be viewed. When an alarm occurs,
the user can press the SYSTEM ALARM button to view and scroll through
the alarms. This will silence the audible part of the alarm, but the SYSTEM
ALARM button will continue to flash until your Service Company views and
clears the alarms in the alarm report located in the system software.
ELBATWOLLANOITACOLERTESREMOTSUC
L/SNTB721CSB21DCL42CSB42DCLMOA23
SCDi&SCD
MOA46
B8SCDiB81SCDi
B81SCDi
SCDihtiw
MOA41
B82SCDi
B82SCD
SCDihtiw
MOA41
L/S
SEYONONONONONONONONONONONON
NTB7
ONSEYONONONONONONONONONONON
21CSB
ONONSEYSEYONONONONONONONONON
21DCL
ONONSEYSEYONONONONONONONONON
42CSB
ONONONONSEYSEYONONONONONONON
42DCL
ONONONONSEYSEYONONONONONONON
MOA23
ONONONONONONSEYSEYSEYSEYONSEYON
SCDi&SCD
MOA46
ONONONONONONONSEYONONONONON
B8SCDi
ONONONONONONONONSEYONONiONON
B81SCDi
ONONONONONONONONONSEYONSEYON
B81SCDi
SCDihtiw
MOA41
ONONONONONONONONONONSEYONON
B82SCDi
ONONONONONONONONONSEYONSEYON
B82SCDi
SCDihtiw
MOA41
ONONONONONONONONONONONONSEY