Filter
Top Products
6
T E L E C O M
ASSIGNING BUTTON VALUES (Extenders)
You can add an “extender” to some programmed buttons to make their functions morespecific.Forexample, youcould addtheextender
“4”tothe[PAGE]button. Normally, when you press the [PAGE] button, you are asked to enter the page zone to page. With the new
extender, pressingthebutton willautomaticallypage zone 4. The following table lists the extenders that can be assigned to
programmablebuttons.
How to Add Extenders
1. Press the [Transfer] button.
2. Press [1] [0] [7].
3. Select the button for adding the extender. Use the [Volume] buttons to scroll through the display of programmable
buttons and press the right soft button to select the button (OR you can press the programmable button or enter the
number if you know it)
4. Enter the extender using the dial buttons.
5. Save and exit the new key value by pressing the [Transfer] button.
Button Description Extender
AB Absence Extension number
ACC Account 000-999
BOSS Director/Secretary 1-4
DIR Directory 1 (PERS), 2 (SYS), 3 (STN)
DP Direct Call Pick-up Extension or extension group number
DS Direct Extension Select Station number
FWRD Call Forwarding 0 = FWD Cancel, 1 = FWD All, 2 = FWD
Busy, 3 = FWD No Answer, 4 FWD Busy/
No Answer, 5 = FWD DND and-6 = Follow
Me
GPIK Group Call Pick-up 01-20
IG In / Out Of Group Extension group number 5xx(x)
MMPG Meet Me Page 0-9, *
PMSG Programmed Message 01-20
PAGE Paging 0-9, *
PARK Park orbit 0-9
RP Ring Plan 1-6
SG Extension Group Selection Extension group number 5xx(x)
SP UCD Supervise UCD group number
SPD Speed Dial 00-49, 500-999
VT Voice Mailbox Voice Mailbox Group (5xx)