Filter
Top Products
Section 2I: Using Voice Recognition 110
4. Press for Digit Dialing.
5. Press for Adapt Digits. (The phone displays the first
digit sequence.)
6. When you are ready to start recording, press the left .
(The phone prompts you to say the first sequence of digits.)
7. Wait for the beep, and then repeat the digits using a normal
tone of voice. (The phone plays back your recording and asks
you if the recording sounds “OK.”)
Ⅲ If the recording sounds OK (no mistakes and no
background noises), say Yes.
Ⅲ If you need to re-record the digits to fix any problems, say
No. (The phone then prompts you to say the digits again.)
8. Wait for the beep, and then record the digits again. (Repeat this
step until you are satisfied with the recording.)
9. After confirming that the recording sounds OK, repeat the
recording process with the next set of digits. (After six sets of
digits, the phone will ask you whether you want to do more
adaptation. Answer Yes.)
10. Repeat steps 6-9 for another six sets of digits. (After the sixth
set of digits, you will be half-way through the session and the
phone will ask “More Adaptation?”)
11. Select OK to continue for six more sets of digits, or press
for partial adaptation. When you are finished with a full
session, you will reach a screen that reads, “Adaptation
Complete.”
Note:
It is recommended that you perform the complete adaptation of Digit Dial
at least once to achieve the maximum benefit of this feature. If a partial
adaptation is performed, you can always return later and resume the
process from the half-way point.
Resetting Digit Dial Adaptation
1. Press the left for Menu.
2. Highlight Settings and press .
3. Press for Voice Service.
4. Press for Digit Dialing.