Filter
Top Products
60
Menu functions
GPRS settings
: customise the settings required
for connecting to the GPRS network.
-
IP address
: (when the proxy is set to
Enable
)
enter the IP address.
-
Port
: (when the proxy is set to
Enable
) enter
the port number.
-
DNS1
: (when the proxy is set to
Disable
) enter
the primary address.
-
DNS2
: (when the proxy is set to
Disable
) enter
the secondary address.
-
APN
: enter the access point name used for the
address of the GPRS network.
-
Login ID
: enter the user ID.
-
Password
: enter the password.
Version
: select an available OMA version and
maximum size limit for sending or receiving
messages.
Block number
: specify phone numbers from which
messages will not be accepted. Numbers specified
here are also included in the SMS blocking list.
Email
(Menu 5.5.3)
You can configure the default network settings that
are required to send or receive e-mails.
Send settings
: set up the following options for
sending e-mails.
•
Send copy to self
: send a copy of your e-mail to
your own e-mail address.
•
Delivery confirm
: set the network to inform you
when your e-mail has been delivered.
•
Read confirm
: send a request for a reply along
with your e-mail.
•
Priority
: select the priority level of your outgoing
e-mail.
•
Include signature
: select to attach your name,
phone number, or a simple memo to your e-mail
Depending on your service provider, it may not
be possible to support the maximum limit
295KB. In this case, try again after changing
the setting to 100KB.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.