Samsung SGH V206 Cell Phone User Manual


 
Phone Settings
92
Display Settings
(Menu 6.7)
Contrast
(Menu 6.7.1)
This option allows you to adjust the contrast of the
display screens to make them lighter or darker.
To adjust the display contrast:
1. Select the required display,
Main LCD
or
Front
LCD
, and press the
Select
soft key.
2. Adjust the contrast using the and keys or
the and keys on the left side of the phone.
3. When you are satisfied, press the
OK
soft key to
save the selection.
Back Light
(Menu 6.7.2)
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
The following options are available:
OFF
: the backlight is not used.
Short
: the backlight comes on when you press a
key or receive a call and switches off 10 seconds
after the last key is pressed.
Long
: the backlight comes on when you press a
key or receive a call and switches off 20 seconds
after the last key is pressed.
Phone Settings
93
Auto Light
(Menu 6.7.3)
Using this feature, you can specify the time for
which the backlight is to be used. This feature helps
conserve your battery power.
The following options are available:
Disable
: the backlight is used according to the
setting in the
Back Light
menu option
(
Menu 6.7.2
); see page 92.
Enable
: the backlight is used only during the
specified period of time. Set the time when the
phone will turn on the light and turn it off, using the
appropriate number keys.
Service Light
(Menu 6.7.4)
This option allows you to select whether or not the
service light on the folder cover is used or in which
color it flashes.
Select one from the seven color settings available.
When the phone is ready for use, the service light
will flash in the appropriate color.
If you do not want to use the service light,
select
Off
.
Graphic Logo
(Menu 6.7.5)
This option allows you to display your operator’s
logo instead of its name.
Off
: the operator name is displayed in idle mode.
On
: the operator logo stored in your phone is
displayed in idle mode; if no logo has been stored,
the operator name is displayed.