Filter
Top Products
89
VVooiiccee
88
VVooiiccee
To record a greeting message:
1. Select Record and press .
2. Wait until a beeping prompt sounds and record the
voice memo by speaking into the microphone.
You can pause recording by pressing . To
resume, press .
3. When recording is completed, press . The phone
automatically saves and activates the message.
Note: Each time you record a new message, your
phone automatically overwrites the old
message.
To play back your greeting message, select Play.
To enable or disable your greeting message, use the
Select option. If you disabled your message, the
phone will use the default greeting.
Screening: enables or disables the screening speaker
which allows you to listen to the caller’s message
while the caller is leaving it.
Wait time: selects the time the phone waits before
answering the call with the greeting message. The
wait time can be set to after 3sec, after5 sec or
after10 sec. Selecting No Ring answers a call by the
greeting as soon as the phone receives the signal of
the call.
Erase All
This option erases all of your voice memos.
When a confirming message appears, select Yes to
confirm the selection. Otherwise, select No.
Voice Answer MENU 6-3
Note: You can use this feature only in digital mode.
This feature allows you to set the phone to answer an
incoming call with the preset greeting message and to
record the caller’s message directly into the memory.
This shares the memory with voice memos and the
amount of time for a message is dependent on the
available memory less any voice memos.
On/Off
This option allows you to turn the Voice Answer
feature on or off.
Config
This option provides you with several setting options
to configure the Voice Answer feature.
The following options are available:
Greeting: You have a predefined greeting message to
play back when a call comes in. Also, you can create
your own greeting message as your preference using
this option.