Filter
Top Products
134
2.
Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3. Press
for Reset Phone. A prompt appears in the display to restore
default settings (except for Contacts).
4. Press the Yes (left) soft key ( ) to reset your phone to factory default
settings. Press the No (right) soft key ( ) to keep the current settings.
System Select
The System Select feature enables you to automatically or manually select the
network used when roaming outside of your home area.
1. In standby mode, press the MENU key ( ), then press (for
Settings), (for Phone Settings), and
for System Select. The
following roaming options appear in the display:
•Home Only — Roaming is off. If your home system is not available then your
call will not be connected, and the no service icon ( ) appears in the display.
In some service areas, an operator may come on-line and ask you how you
would prefer to pay for the call.
• Automatic — Roaming is on. It will always try your calls using the Preferred
Roaming List (PRL) loaded into your phone. If a preferred service is not found,
then this option will attempt to acquire any digital service.
2. Use the navigation keys and to highlight the desired Roam option, the
press to save your selection.
The Phone Settings menu appears in the display.
Set Time
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Main Clock feature is disabled. The network adjusts time and date
automatically.
1. In standby mode, press the MENU key ( ), then press (for
Settings), (for Phone Settings), and for Set Time. The
following options appear in the display:
•Set Time
• Set Date
ghi
wxyz
jkl
ghi
wxyz
jkl
jkl