Voice Kit 95
Adapt Digit Dial to your Voice
1. In standby mode, press the left soft key ( ) Menu.
2. Press , , for Setup Digit.
3. Press for Adapt Digits.
Your phone displays the first digit sequence and “Please
say
” plays through the speaker followed by the four digits
appearing in the display.
4. Wait for the beep and repeat the digits using your normal
tone of voice.
5. After a moment, the phone plays back the recording and
prompts “
Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
• If you say “No,” the phone prompts you to
pronounce the digits again. Wait for the beep and
then re-record. Repeat this step until you’re satisfied
with the recording.
6. After confirming that the recording sounds ok, repeat the
recording process with the next set of digits. After six
sets of digits, the phone asks whether you want to do
more adaptation. Answer “
Yes.”
7. Repeat steps 4-6 for another six sets of digits. After the
sixth set of digits, the phone indicates that adaptation is
complete.