Filter
Top Products
18
Power save mode
Unless the backlight setting for the LCD has been changed,
the backlight dims after a minute of inactivity, and then turns
off. With
Power save enabled, the backlight for the LCD is
always dim. After approximately one minute of inactivity,
Power save turns the backlight off. To enable or disable Power
save
:
1. In standby mode, press the left soft key ( ) Menu.
2. Press , , for Backlight. The following backlight
options appear in the display.
1 Lcd
2 Keypad
3 Power save
3.
Use the navigation key to highlight Power save, then
press .
Off and On appear in the display.
4. Use the navigation key to highlight On or Off, then
press .
Ringer setting
1. In standby mode, repeatedly press the volume key ( )
on the left side of the phone up or down. Options are:
2. Press once you’re satisfied with the setting. The
phone returns to standby mode.
• Silent • Level 3
• 1 Beep • Level 4
• VibeTonz • Level 5
• Level 1 • Vib+Ring
• Level 2 • Vib&Ring