Filter
Top Products
Solve problems
130
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right
cellular network.
• Be sure that you have not set an outgoing
call barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on.
([ ] pressed for more than one second.)
• Be sure that you have accessed the right
cellular network.
• Be sure that you have not set an incoming
call barring option.
Your correspondent cannot hear you
speaking
• Be sure that you have switched off the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
The phone starts beeping and “Battery
low” flashes on the display
• Your battery is insufficiently charged.
Recharge the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the
display ( ). The number of bars indicates
the signal strength from strong ( ) to
weak ( ).
• Try moving the phone slightly or moving
closer to a window if you are in a building.
No number is dialled when you re-call a
Contacts entry
•Use the
Contact list
feature to ensure the
number has been stored correctly.