Filter
Top Products
153
Vibration feedback
You can set the level of intensity at which you want the vibration mode.
1. From
Phone settings
menu, touch
Vibration feedback
.
2. Touch and drag the
Vibration intensity
slider to the intensity level you desire (range is 0-7).
3. Touch
Save
.
Calibration
The Calibration feature allows you to re-align the screen’s touch accuracy. Use this feature only when the device
does not respond properly when you touch the screen.
1. From
Phone settings
menu, touch
Calibration
.
2. Touch the center of the target and repeat this step for each target that displays.
3. Touch
OK
when the
New settings saved...
message displays.
Auto keypad lock
ᮣ
From
Phone settings
menu, touch
On
or
Off
from the
Auto keypad lock
field.
Security
The Security feature enables you to restrict the use of your phone by others and to restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
ᮣ
From
Phone settings
menu, touch
Security
.
Lock Phone
When the Lock Phone feature is enabled, the phone is locked and you must enter the 4- to 8-digit phone password
each time the phone is switched on.
To change the phone password, refer to the next section.
Once you enter the correct password, you can use the phone until you switch it off.
ᮣ
Touch
On
or
Off
from the
Lock phone
field.
T749 Spark.book Page 153 Wednesday, June 10, 2009 9:12 AM