Filter
Top Products
18 Section 2A: Your Phone – The Basics
Installing the Battery
To install the Li-Ion battery:
1. Insert the battery into the opening on the back of the phone at a
45-degree angle,making sure to line up the gold contacts.Gently
press down until the battery snaps into place.
2. Install the protective cover by lining up the tabs at a 45-degree angle,
and gently press down until the cover snaps into place.
Removing the Battery
WARNING: Do not handle a damaged or leaking Li-Ion battery as you can be burned.
To remove your battery:
1. Make sure the power is off so that you don’t lose any stored numbers
or messages.Remove the protective cover by pressing the release
latch and pulling up on the back of the cover.
2. Use your thumbnail to lift and then remove the battery as indicated in
the diagram.