Sharp 72GF-66E Cell Phone User Manual


 
72GF-66E
3
ELECTRICAL SPECIFICATIONS
Picture Intermediate frequency
L’..................................................33.9MHz
L, B/G, D/K, I...............................38.9MHz
Sound Carrier Trap
L’..................................................40.4MHz
L, D/K...........................................32.4MHz
B/G..............................................33.4MHz
I....................................................32.9MHz
Adjacent Sound Carrier Trap
L’..................................................32.4MHz
L, D/K, B/G..................................40.4MHz
I....................................................40.9MHz
Adjacent Picture Carrier Trap
L’..................................................41.9MHz
L, D/K, I........................................30.9MHz
B/G..............................................31.9MHz
Aerial Input Impedance
VHF/UHF ................. 75 ohm Unbalanced
Tuning Ranges .... 48.25 MHz thru 855.25 MHz
VHF: E2-E12 CH, F2-F10, IR A-IR J CH
S1-S41 CH (Hiperband)
UHF: E21-E69 CH, I21-I69 CH
White Level
Set brightness control to get total picture tube cathode current of 600 microampere under no
signal condition. Maximum necessary correction of each picture tube cathode current to get 8550
degrees K+1 MPCD screen temperature should not exceed 15% of its original value.
X=0.290 Y=0.300
Power Input .................... 220V-240 Volts AC 50Hz
Power Consumption
Normal Operation .................................110W
Stand-by Operation ..................................1W
Audio Power Output Rating (MPO) / Impedance
Internal Left Speaker...................15W (MPO)
Internal Right Speaker.................15W (MPO)
Internal Centre Speaker..........15W (MPO)
Internal Subwoofer......................20W (MPO)
Speakers
Left / Right.........................7 12W, 6 x 12cm
Centre ..............................7 12W, 6 x 12 cm
Subwoofer.................4.5 20W, 11cm Round
Convergence
Static (Centre) ....... between any two colours
Dynamic ................... after static equals zero
Focus .............. ....... High Bi-Potential Electrostatic
Sweep Deflection ............................... Magnetic
WARNING
The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug
and power receptacle, when servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel.
EN 61000-3-2
In order to comply with the European Norm 61000-3-2 regarding Electromagnetic compatibility
(EMC) on every TV set manufactured from January 2001.
On TV set manufactured before the above date (Serial Number 801022 or previous), this modifica-
tion is not required.
MODEL DESTINATION & DIFFERENCES.
72GF-66EDE: Germany, Austria. Particular Operation Manual.
72GF-66EES: Spain. Particular Operation Manual.
72GF-66EGG: Greece. No Operation Manual from Factory. Particular EPROM.
72GF-66EIT: Italy. Particular Operation Manual.
72GF-66ECH: Switzerland. Particular Operation Manual.
Specifications are subject to change without prior notice.