Filter
Top Products
Installation and Operation 5
● Talk time is approximately 2.5 hours and standby time is approximately 30 hours. Actual
values will vary with the network environment.
● The battery is intended for backup purposes only (in the event of a power failure).
● When the power adapter is connected the battery will automatically charge.
● When fully charged the battery will automatically stop charging.
● Remove the battery if the device is not in use for a long time.
Installing the Antenna
The following steps illustrate how to install the antenna.
1. Make sure the device is turned off.
2. Align the antenna with the antenna port on the device as illustrated below.
3. Screw the antenna into the port, ensuring that the connection is secure.
Installing the Power Adapter
The following steps illustrate how to install the power adapter. Under normal usage, the device
relies on the external power adapter for its power supply.
1. Insert the power adapter into the DC input port.
2. Plug the unit into a standard AC electrical outlet.
Note: Backup battery power will only be used during power failure or if the external power
adapter is not in use.