Filter
Top Products
4
PREPARATION
CONNECTING A
MOTOROLA MICRO TAC
SERIES BATTERY
The conditioner/charger is designed to
charge a Motorola Micro Tac series
battery that you can mount directly
onto the conditioner/charger.
1. Hold the battery with its charging
contacts to the right, then place
the battery’s bottom slide groove
over the conditioner/charger’s
slide guides.
2. Push the battery toward the left
until it clicks into place.
CONNECTING A
MOTOROLA 9800
SERIES OR NOKIA 101/
232 BATTERY
To charge a Motorola 9800 series,
Nokia 101, or Nokia 232 battery, you
need to mount the proper supplied
charging adapter along with the bat-
tery.
Note:
The adapters are labelled on the
bottom.
Follow these steps to charge a Motor-
ola 9800 series battery using the ap-
propriate charging adapter.
1. Place the charging adapter’s bot-
tom slide groove to the right of the
charger/conditioner’s slide guides.
Note:
The adapter’s notches (on
the bottom) and the conditioner/
charger’s tabs must be aligned.
2. Push the adapter toward the left
until it clicks into place.
3. Hold the battery with its charging
contacts to the right, then place
the battery’s bottom slide groove
over the adapter’s slide guides.
Motorola Micro
Tac Battery
Label on bottom
of adapter
Ali
g
nment notches
and tabs
23-401.fm Page 4 Friday, August 6, 1999 2:35 PM